Aqua Lung LEGEND LX SUPREME Service Manual download pdf (Page 6)

6 Legend LX Second Stage Service Manual

13. Insert a rod or tool (116236) into the insert (threaded

side) and push out the valve seat assembly. Separate

the components of the valve seat.

14. Use your fingernail to remove the seat (18) and the

small O-ring (20) of the shuttle valve (12).

15. Unscrew the seat (9) 6 or 7 turns using a screwdriver.

Push the plastic part of tool (116236) into the insert to

push out the seat. Remove the seat O-ring (10).

16.

17.

18. If the regulator is a Legend LX Supreme, remove the lip

shield (36). Remove the mouthpiece collar (29) then the

mouthpiece (17).

END OF DISASSEMBLY

To remove the bubble

deflector (28), first

immerse the casing in

hot water (50°C).for 2-

3 minutes.

Pull on one end of the

deflector to remove it.

Lift the exhaust valve

(27) and check that its

surface is clean and

free of scratches. It

should be flexible and

its edges should be

clean. If it is in good

condition it is not

necessary to remove it

and it can be re-used.

If there are any signs

of deterioration it

should be replaced.

Before starting to re-assemble

the regulator, make sure that all

replacement parts have been

cleaned and lubricated in

accordance with Procedure A :

Cleaning and Lubricating on

page 14

1 2 3 4 5 6 7 8 9 10 11 ... 18 19

No comments

Aqua Lung LEGEND LX SUPREME Service Manual Page 6