Aqua Lung SECOND STAGE User Manual download pdf (Page 7)

7CONSHELF XIV USER'S MANUAL

3.1.2 DIN Connector

Remove the protector cap from the cylinder valve.1.

With the cylinder valve facing away from you, release a small amount2.

of air from the cylinder by turning the handwheel counter-clockwise

to open the valve only slightly. When air is heard exiting, immediately

close the valve. This will clear any moisture or debris that may be

inside the threaded cylinder valve opening.

Check the condition of the o-ring located in the end of the DIN connec3. tor.

Position the rst stage regulator near the cylinder valve so the LP hose 4.

of the primary second stage will be routed over the right shoulder.

Thread the rst stage DIN connector into the cylinder valve, turning

the handwheel clockwise by hand until it is lightly snug. DO NOT use

tools to tighten (Fig 2).

(Fig 2)

NOTE: The Conshelf XIV does not come standard with a DIN

Connector. A DIN Adapter Kit , PN 107455, is available and

can be installed by a Trained Technician.

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

No comments

Aqua Lung SECOND STAGE User Manual Page 7